| Soyuzeless was my first
attempt to create a model rocket that had any resemblence to something
full scale. It is reminiscent of the Russian Soyuz launch vehicle
but only just barely. The bodytube and booster strap-ons are made
of cardboard tube, while the nosecone is a wrapped paper arrangement reinforced
with some balsa strips.
Launch:
Because of the odd shape of this vehicle, estimating
fin size was nearly impossible. I took my best guess and took it
out to fly. First launch used a C6-5 motor. The CG and CP were
way off and this became apparent immediately after lift-off. The
rocket began tumbling and hit the ground about 10 feet from the launcher.
Bent fins and crushed cardboard was the result. The rocket is not
a complete write-off, and I will give it another try after adding some
weight to the nose.
Length: 26"
Diameter: 2"
Weight: 6.5 oz
Recovery: 12" parachute
Engines: C6-5
Max altitude: so far about 10 feet |
